Real Tech’s robust UVT probe sensor provides rapid real-time measurement of ultraviolet transmittance (UVT) in water or wastewater. Benefiting from a long-life UV LED lamp, accurate and stable measurements are obtained with minimal maintenance or operator intervention. Continuous UVT monitoring can bring significant value to many applications including UV disinfection.
The effectiveness of a UV disinfection system is determined by the UV dose that the system is able to deliver to the water. The UV dose is dependent primarily on the combined effects of the UV light intensity, the exposure time of the system and the UVT of the water. Therefore, precise and reliable UVT monitoring is required for optimal performance and efficiency. Real Tech’s S series UVT probe is cost effective and accurate, making it a practical choice for many UV disinfection applications.
FEATURES & BENEFITS
- Affordable real-time UV transmittance (UVT) monitoring
- Robust submersible probe for in-situ measurement
- Operator friendly, low maintenance UV LED design
- Innovative custom calibration limits maintenance
- Simple to install and easy to operate
|Path Length Options||1, 2, 4, 10 mm|
|Range||Depends on model selected. Refer to range chart.
|Accuracy||± 0.5% FS|
|Units||% or cm-1|
|Sampling Time||10 seconds|
|Calibration||Factory calibrated. Field adjustment of calibration is possible.|
|Cleaning||Automatic compressed air or pressurized water cleaning with optional Probe Clean System
|Self-Diagnostic||Detection and diagnosis of internal system fault|
|Alarms||Continuous detection of leaks, lamp output, humidity, temperature and electrical fault|
|Humidity Control||Humidity sensor with desiccant pack|
|Light Source||UV LED|
|Pressure Rating||15 PSI|
|Operating Temp.||0 to 45°C (32 to 113°F)|
|Housing Material||Stainless steel (SS 316)|
|Wetted Materials||Epoxy, Sapphire, SS 316, Viton|
|Ingress Protection Type||IPX8|
|Dimensions||15” H x 2.0” Diameter|
|Warranty||2-year limited warranty (Extended care packages available)|
* Technical Specifications are subject to change without notice.
* Operating (water) temperature absolute maximum 55°C (131°F). Instrument performance reduced when operating outside recommended operating range. Contact Real Tech to verify application.
** Weight does not include cable. Cable weight: 0.70kg (1.55lb).
MODELS & RANGE
S series models include UVT probe sensor and 35 feet of communication cable. Controller, mounting kit, and automatic compressed cleaning systems sold separately.
|MODEL#||PATH LENGTH||UVT (%)||PRICE|
|S2010||1 mm||0 - 100||Request a Quote|
|S2020||2 mm||0 - 100||Request a Quote|
|S2040||4 mm||0 - 100||Request a Quote|
|S2100||10 mm||1 - 100||Request a Quote|
* Stated ranges approximate, dependent on industry, site and application – contact Real Tech to confirm model selection
CONTROLLERS & ACCESSORIES
|S-229005||Real Controller Lite||Wall mounted controller with 4-line x 20-character back lit LCD display.
Includes modbus RTU (RS485).
|S-169000||Real Controller||Wall mounted controller with 4-line x 20-character back lit LCD display.
Includes modbus RTU (RS485), 1 channel of 4-20 mA out and digital I/O module.
|S-11TPC||Real Controller Pro||Wall mounted controller with 12.1” colour LCD touch panel PC interface (PC inside cabinet model).
Includes Modbus RTU and Modbus TCP.
|S-11TPCD||Real Controller Pro||Wall mounted controller with 12.1” colour LCD touch panel PC interface (PC external on door model).
Includes Modbus RTU and Modbus TCP.
|S-228070||Probe Clean System||Cleaning valve module requires on-site compressed air or pressured water for automatic probe cleaning|
|S-228080||Compressed Air System||Compressor for air cleaning when compressed air not available on-site|
|S-189031||Probe Mounting Kit I||Provides secure mounting attachment for probe to a tank wall or open channel
wall. No pole included
|S-189032||Probe Mounting Kit II||Provides secure mounting attachment for probe to a tank wall or open channel
wall. 5ft pole included
|S-189033||Probe Mounting Kit III||Provides secure mounting attachment for probe to a tank wall or open channel
wall. 10ft pole included
SIMPLE, PLUG & PLAY UVT MONITORING
Ideal for open channel applications, Real Tech’s UVT probe is a submersible instrument installed directly in-situ. The UVT probe must be connected to a Real Tech controller for operation.
Multiple sensors can be added to Real Tech’s controllers to expand water quality monitoring capabilities.
Simple to install, easy to operate, no reagents and no waiting for lab results.
LIQUID AI® COMPATIBLE
Our Liquid Ai® data services complement our real-time quality monitoring systems. Calibration Health Monitoring ensures accuracy and reliability are maintained so our clients can have the utmost confidence in their results, while our Remote Monitoring platform enables access to data anywhere, anytime.