+1 905.665.6888
[email protected]
Facebook
Twitter
LinkedIn
YouTube
  • COMPANY
    • Who We Are
    • Why Choose Us
    • Who We Work For
    • Client Testimonials
  • PARAMETERS
    • BOD
    • COD
    • TOC
    • DOC
    • UV254
    • UVT
    • Nitrate
    • Nitrite
    • TSS
    • Permanganate
    • Chromium VI
    • Colour and Dyes
    • THM / HAA
    • Ozone
    • Benzene
    • BTEX
    • Hydrocarbons
    • Hydrogen Peroxide
    • Contaminant Alarm
    • Spectral Fingerprint
    • Turbidity
    • show all …
  • PRODUCTS
    • Meters
      • BOD/COD Meter
      • Multi-Wave Meter
      • TOC/DOC Meter
      • UV254/UVT Meter
    • Analyzers
      • Colour Analyzer
      • Free Chlorine Analyzer
      • Nitrite Analyzer
      • TSS Analyzer
      • UV254 Analyzer
    • Sensors
      • Ammonium Sensor
      • Ammonium Probe
      • Benzene Sensors
      • BOD/COD Sensors
      • Chromium VI Sensors
      • Colour Sensors
      • Conductivity Probe
      • Dissolved Oxygen Probe
      • Free Chlorine Sensor
      • Hydrocarbons Sensors
      • Multi-Wave Sensors
      • Nitrate Sensor
      • Nitrate/Nitrite Sensors
      • Nitrite Sensors
      • Ozone Sensors
      • Permanganate Sensor
      • pH/ORP Probe
      • Spectrum Sensors
      • Surfactants Sensor
      • TOC Sensors
      • TSS Sensors
      • Turbidity Probe
      • UV254 Sensors
      • UVT Probe
    • Controllers
      • Real Controller Lite
      • Real Controller
      • Real Controller Pro
    • Accessories
      • Clean Systems
      • Pump Clean Systems
      • Pump Clean Pro System
      • Probe Clean System
      • Compressed Air System
      • Dual Feed Systems
    • Data Services & Software
      • Remote Monitoring
      • Calibration Health
      • Anomaly Detection
      • Data Management PC Software
    • Product Selection Guide
    • show all …
  • APPLICATIONS
    • Municipal Drinking Water
      • Source Water Monitoring
      • Blending Optimization
      • Coagulation Optimization
      • Contaminant Removal Efficiency
      • UV Disinfection Performance and Optimization
      • DBP and Formation Potential Monitoring
      • Smart Water Networks
      • Nitrification Monitoring
    • Municipal Wastewater
      • Influent Wastewater Monitoring
      • Chemical Dose Optimization
      • Aeration Optimization
      • UV Disinfection Performance and Optimization
      • Advanced Treatment Monitoring
      • Effluent Discharge Monitoring
    • Industrial Wastewater
      • Product Loss Monitoring
      • Chemical Dose Optimization
      • Aeration Optimization
      • Nutrient Dose Optimization
      • UV Disinfection Performance and Optimization
      • Advanced Treatment Monitoring
      • Effluent Discharge Monitoring
    • Industrial Process Water
      • Process Water Control
      • Cooling Water Contamination
      • Boiler Feedwater Impurities
      • Ultrapure Water Monitoring
      • Water Reuse Optimization
      • Ballast Water Treatment Monitoring
  • RESOURCES
    • News
    • Blog
    • Downloads
    • FAQ
  • CONTACT US
    • Contact Us
    • Request a Quote
    • Product Registration
    • Careers

SOURCE WATER MONITORING: ORGANICS OR COLOUR

October 3, 2017Real Tech

When looking at source water monitoring for drinking water treatment, the terms colour and natural organic matter (NOM) are often interchanged. This may be due to organic matter, such as humic acids, causing visible colour in surface water. However, its important to note that the absence of colour in surface water does not always translate into an absence of organic matter. As an example, pesticides in water will not show up with a colour instrument but will be detected by a UV254 or UV spectral analysis instrument. Therefore, organics are best measured with a UV254 or UV spectral absorbance instrument as direct colour measurements will not provide an accurate or reliable surrogate for organic matter.

UV254 AND COLOUR

Organic measurements, such as UV254, can however provide a good indication of colour if most of the colour comes from organic matter. If this is the case, a UV254 instrument can be used to provide an approximation of colour based on organics. The correlation will be dependent on the particular matrix of organics at that site but the two are often very linear. Real Tech’s UV254 analyzers provide a scaling factor function so that the measured level of organics can be displayed in units of Hazen.

SPECTROPHOTOMETERIC DETERMINATION OF COLOUR

Colour can be determined using spectrophotometry between 450 and 465 nm wavlengths. There are two types of colour measurement, true colour and apparent colour. True colour is the colour after turbidity has been removed (filtered through a 0.45 micrometer pore size) so that all the colour measured in due to dissolved material. Apparent colour is measuring colour of a water sample as is, that is, including both true colour and turbidity.

Both apparent colour and true colour can be monitored continuously using an online UV-VIS spectrophotometer. While apparent colour can be measured directly, the true colour measurement will be an approximation as filtering is not typically feasible and turbidity affects are approximated and compensated for using additional reference wavelengths.

GO BACK TO BLOG

 

1150 Champlain Court, Whitby, Ontario L1N 6K9
+1 905.665.6888
Toll Free US and Canada:
1.877.779.2888
+1 905.665.7025
[email protected]
Facebook
Twitter
LinkedIn
YouTube

Real Tech Blog

Downloads

News

 

 

Partner Portal Login

Accessibility Policy

Privacy Policy

© 2017 Real Tech Inc. All rights reserved.