Free Chlorine Analyzer

REAL FREE CHLORINE ANALYZER

FC

Parameter(s): Free chlorine, chlorine dioxide, and/or dissolved ozone

OVERVIEW

Real Tech’s bypass style Free Chlorine analyzer provides rapid real-time measurement of free chlorine, chlorine dioxide and/or dissolved ozone in water or wastewater. Ideal for pressurized applications, the monitoring solution has three measurement ranges.

FEATURES & BENEFITS

Affordable, real-time free chlorine, chlorine dioxide and/or dissolved ozone measurement
Potentiostatic sensor technology
Range for wastewater to high purity applications
Automatic temperature compensation
Low maintenance requirements
Simple to install and operate
No reagents required

SPECIFICATIONS

CHARACTERISTIC	TECHNICAL DATA
SENSOR
Parameters	Free chlorine, chlorine dioxide, and/or dissolved ozone
Free Chlorine Range	Selection of three measuring ranges: 0-2 mg/L , 0-20 mg/L or 0-200 mg/L
Resolution	0.001, 0.01 or 0.1
Units	ppm / mg/L
Sampling Time	0.5 seconds
Measurement Principle	Potentiostatic measurement technology
Electrodes	2 platinum rings
Reference	Gel with annular junction
Sensor Lifetime	Approximately 12-18 months. Depends on site and application
Calibration	Manual correction on the selected scale and sensor’s current offset
Cleaning	Pressurized DI water only
Temperature Compensation	Automatic with RTD
Flow	Constant flow required. ~150-500 mL/min
Fluid Connections	Inlet: 1/4” fitting. Outlet: fitting for 10x14 mm tubing
Dimensions	5.90”H x 3.54”W x 1.57”D
TRANSMITTER
Interface	Four buttons to control set-up and configuration
Display	1 line x 8 character LCD
Output	Self-powered 4-20mA, RS485 serial to PC
Electrical	9-36 VDC
Operating Temp	0 to 50°C (32 to 122°F)
Storage Temp	-10°C to 60°C (14 to 140°F)
Weight	5 lb
Enclosure	IP40, wall mountable. IP65 / NEMA4 optional.
Dimensions	2.79”H x 3.74”W x 2.28”D (IP65/ NEMA 4 cabinet - 10.25”H x 10.25”W x 5.5”D)
Warranty	2-year limited warranty

* Technical Specifications are subject to change without notice.

Note: The free chlorine sensor requires a constant flow for stable measurement, therefore an accompanying bypass manifold (chamber) is included. The bypass manifold and transmitter are both wall mountable.